Konica Minolta CL-70F - Displaying in CIE1931 (CIE1964) Comparison; [CIE1931 (CIE1964) Comp.] Mode


4. Setting the Measuring Conditions
4-3-6 Displaying in CIE1931 (CIE1964) Comparison
[CIE1931 (CIE1964) Comp.] Mode
isplays the measured result in tet format together with the position on the
CI or CI) chromaticity diagram. The measured result can be compared
with up to  sets of memoried values.
When  degrees of view of angle is selected in ardware Setting, this mode shows
CI.
CI appears when 0 degrees of view of angle is selected.
Operation
1.
Touch the [CIE1931 (CIE1964) Comp.] icon on the Display Mode
screen.
The CIE1931 (CIE1964) Comp. screen will be displayed. (
¨
P28)
2.
Touch the [Measuring Mode] icon.
The Measuring Mode Selection screen will be displayed. Select the desired
measuring mode to use. (
¨
P22)
3.
Touch the [Exposure Time] indication in the Measurement screen.
Set the exposure time to Auto, 0.1 sec, or 1.0 sec during ambient light
measurement. (
¨
P24)
[Measuring Mode] Icon
isplay Mode Icon
CI CI)
Comparison isplay
CIE1931 (CIE1964) Comp. Screen
Memory Selection Icon
Indication isplay
FF chec bo
Color temperature
display area
Current Measurement
posure Time Indication