22
4. Setting the Measuring Conditions
4.
Setting the Measuring Conditions
4-1 Selecting the Measuring Mode
4-1-1 Matching Measuring Mode with Light Sources
Select the Measuring Mode to use.
NOTICE
When changing the measuring mode setting, the measurement data will be erased.
No. Measuring Mode Icon Description
1
Ambient Light Mode
Measures continuous light such as sunlight, tungsten,
uorescent, and L lights.
¨
P61)
2
Cordless Flash Mode
etects ash color temperature without meter-ash
connection after Measuring utton pressed to arm
meter for 0 seconds) and ash red separately.
Measure using a ash during the wait time.
¨
P65)
3
Cord (PC) Flash Mode
etects ash color temperature with C synchro)
cord meter-ash connection.
¨
)
Measuring Mode Selection Screen
1
2
3
To Next Page
Loading...
