Konica Minolta CL-70F - Displaying in CIE1976 Comparison; [CIE1976 Comp.] Mode

54
4. Setting the Measuring Conditions
Operation
1.
Touch the [CIE1976 Comp.] icon on the Display Mode screen.
The CIE1976 Comp. screen will be displayed. (
¨
P28)
2.
Touch the [Measuring Mode] icon.
The Measuring Mode Selection screen will be displayed. Select the desired
measuring mode to use. (
¨
P22)
3.
Touch the [Exposure Time] indication in the Measurement screen.
Set the exposure time to Auto, 0.1 sec, or 1.0 sec during ambient light
measurement. (
¨
P24)
4-3-8 Displaying in CIE1976 Comparison
[CIE1976 Comp.] Mode
isplays the measurement result in tet format together with the position on the
CI7 chromaticity diagram. The measured result can be compared
with up to  sets of Memoried alue.
[Measuring Mode] Icon
isplay Mode Icon
CI7 Comparison
isplay
CIE1976 Comp. Screen
Memory Selection Icon
Indication isplay
FF chec bo
Color temperature
display area
Current Measurement
posure Time Indication