To Next Page
B
Bryan ThomasJul 31, 2025
What to do if Konica Minolta DF-612 Printer displays 'Jam display'?
- LLauren NelsonAug 1, 2025
If your Konica Minolta Printer displays a 'Jam display', here are several possible solutions: * Change the paper. * If the paper is curled, wavy, or damp, change the paper and ensure correct paper storage procedures. * If there's a foreign object in the paper path, or the path is deformed or worn, clean or replace the paper path. * If the rolls/rollers are dirty, deformed, or worn, clean or replace the defective roll/roller. * Ensure the edge guide and trailing edge stop are correctly positioned; adjust as needed. * If the actuators aren't working, correct or replace the defective actuator.
General
