Need help?Do you have a question about the Konica Minolta DiMAGE Scan Elite 5400 II and is the answer not in the manual?
General| Type | Film Scanner |
|---|---|
| Maximum Resolution | 5400 dpi |
| Dynamic Range | 4.8 Dmax |
| Bit Depth | 16-bit |
| Supported Film Formats | 35mm, mounted slides |
Details scanner type, sensor, pixels, filter, and scanning system parameters.
Describes interface connector, focus methods, and light source.
Outlines image correction features and color matching output spaces.
Lists physical dimensions, power requirements, and operating environment conditions.
An indexed list of part numbers with corresponding page references.
An illustrated exploded view of the scanner with part labels.
A detailed table of part numbers, part names (English and Japanese), and quantities.
Provides a guide to understanding each field in the Parts Modification List.
Details specific parts modifications for motor and gear components.
Details specific parts modification for the Holder Hold SP component.
Explains repair symbols and provides precautions for chemicals, plastic parts, and PCBs.
Illustrates the assembly of major exterior and interior parts like the upper case and PCBs.
Details the installation procedure for flexible flat cables (FFCs).
Illustrates how to properly connect various connectors to the Printed Circuit Boards (PCBs).
Step-by-step instructions for assembling the focus dial and related gears.
Lists necessary measuring instruments, tools, and jigs for performing repairs.
Lists essential subsidiary materials such as adhesives required for the repair process.
An index for supplementary information, referencing specific repair details and dates.
Provides information and procedure to correct distortion in index images.
Outlines the purpose and structure of the quality check list for users.
Details preparatory actions including software installation for performance checks.
Instructions for setting up and scanning the scanner gauge chart.
Explains the process of measuring the scanner gauge chart data.
Describes how to verify the results from the scanner gauge chart against standards.
Details the preparation and loading process for the color chart.
Instructions for scanning the color chart and saving the image file.
Explains how to measure the color chart data using the appropriate software.
Describes how to verify the results from the color chart against specified standards.
Lists the acceptable range for color chart performance metrics.
Lists all necessary equipment, software, and CD-ROMs for the check list procedures.
To Next Page