Konica Minolta DF-633 User Manual

DF-633
Reverse Automatic Document Feeder
INSTALLATION MANUAL
Applied Machines: AAJ1/AAJ3/AC4F; ACN2/ACN3
MFP: 26 ppm/24 ppm/22 ppm/21 ppm/20 ppm
Product Code: 266i/246i/226i; 225i/215i/205i
E-12019. 8 Printed in China AAJ4-9550-12
1. Pre-installation check items
■ General checks
• Refer to “Pre-installation check items” described
in the installation manual of the main body.
• Be sure to turn OFF the main power switch of
the main body and unplug the power cord before
starting the installation.
• Do not turn the power ON before the instruction.
■ Notice about this option
● Tools/jigs required for installation
• Cleaning pad
• Alcohol (isopropyl alcohol)
■ Notice about description contents of the
manual
• This manual provides the illustrations of the ac-
cessory parts and machine that may be slightly
different in shape from yours.
In that case, instead of the illustrations, use the
appearance of your machine to follow the instal-
lation procedure. This does not cause any signif-
icant change or problem with the procedure.
• If none of the later steps instruct you to use the
parts including screw and cover that you re-
moved following the instructions described in this
manual, discard them.
2. Accessory parts
No. Name Shape Q’ty
1. Original mat 1
2. Chart 1
3. Shoulder screw 1
4. Installation
manual
1 set
WARNING
Keep this bag away from babies and chil-
dren. Do not use in cribs, beds, carriages,
or playpens.
The thin film may cling to nose and mouth
and prevent breathing. This bag is not a
toy.

Konica Minolta DF-633 Specifications

General

Brand	Konica Minolta
Model	DF-633
Category	Printer Accessories
Language	English

Summary

Pre-installation Check Items

General Checks

Refer to main body manual for pre-installation checks. Ensure main power is OFF and cord unplugged before starting.

Required Tools and Supplies

Lists necessary tools and materials for installation, including cleaning pad and isopropyl alcohol.

Manual Description Notes

Manual illustrations may differ; follow machine appearance. Discard unused removed parts as instructed.

Installation Procedures

Configuration Procedures

Adjustment Procedures

Zoom Ratio Adjustment (Models 266i/246i/226i)

Adjusts the zoom ratio for the document feeding tray and main body using service mode settings.

Measuring DF Skew (Models 266i/246i/226i)

Measures the skew of the document feeder using a chart and service mode.

Measuring DF Skew (Models 225i/215i/205i)

Measures document feeder skew for specific models by checking chart alignment.

Adjusting DF Skew

Procedure to adjust document feeder skew by loosening and tightening screws.

Attaching the Original Mat

Instructions for placing and affixing the original mat on the document glass.

Auto Stop Position Adjustment (Models 266i/246i/226i)

Adjusts the auto stop position using a chart and service mode settings.

Zoom Ratio and Registration Adjustment (Models 225i/215i/205i)

Adjusts zoom ratio and registration for specific models using charts and copies.

Checking Reference Zoom Ratio

Checks the reference zoom ratio by making copies and measuring reproduction lengths.

Zoom Ratio Adjustment (Models 225i/215i/205i)

Adjusts zoom ratio in service mode for specific models.

Registration Check (Full Size/2-Sided)

Checks copy registration for full size and 2-sided copies using a chart.

Registration CD Adjustment (Width B)

Adjusts the CD registration (Width B) using service mode settings.

Registration FD Adjustment (Width A)

Adjusts the FD registration (Width A) using service mode settings.