To Next PageTo Next PageWhat to do if my Konica Minolta All in One Printer says to close the section indicated by the arrow?
If your Konica Minolta All in One Printer shows a message indicating that you need to properly close a section indicated by an arrow, it means that a door or cover is open. Ensure that all doors and covers are properly closed.
What to do if Konica Minolta DI2510 says maximum copies reached?
If your Konica Minolta All in One Printer displays a message indicating that the maximum number of copies allowed for the registered account has been reached, it means that you have reached the total amount of copies as set by the administrator. Ask the administrator to clear the number of copies.
Why Konica Minolta All in One Printer says not enough memory?
If your Konica Minolta All in One Printer displays a message saying 'Cannot XXXXXXXX (not enough free memory),' it means the memory is full, preventing further scanning. Print pages or delete queued jobs to clear some memory.
What to do if Konica Minolta DI2510 says maximum print jobs reached?
If your Konica Minolta All in One Printer displays a message indicating that the maximum number of jobs to be printed has been reached, it means that you have reached the total amount of jobs to be printed as set by the administrator. Ask the administrator to clear the number of jobs to be printed.
Why Konica Minolta DI2510 is paused?
If your Konica Minolta All in One Printer is paused, when making 2in1 copies, the second document page could not be scanned while scanning manually. Position the second document page or press [Finish].
Why this mode cannot be selected on Konica Minolta DI2510 All in One Printer?
If your Konica Minolta All in One Printer displays the message 'This mode cannot be selected with XXXXXXXX', it means that functions that cannot be used together are selected. Make copies using only one of the functions.
Why are there dark spots on my Konica Minolta All in One Printer prints?
Dark specks, spots, or streaks on your Konica Minolta All in One Printer output usually indicate a dirty original glass or document pad. Try wiping the glass with a dry, soft cloth. If that doesn't work, clean the document pad with a soft cloth dampened with a mild detergent.
What to do if nothing appears on the Konica Minolta All in One Printer touch panel?
If nothing appears on the touch panel of your Konica Minolta All in One Printer, it might be in Energy Saver or Sleep mode. Press any key on the operation panel to cancel it. Alternatively, the printer might not be turned on. Check that the power switch is set to “I” and the sub power switch has been pressed in.
Why is the print blurry on my Konica Minolta All in One Printer?
Blurry output from your Konica Minolta All in One Printer can be due to damp paper. Try replacing the paper. It could also be that the document wasn't pressed closely enough against the original glass. Make sure to position the document correctly.
What to do if Konica Minolta All in One Printer says not enough memory?
If your Konica Minolta All in One Printer displays an error indicating not enough free memory, print or delete queued jobs to clear some memory.
General| Printing Technology | Laser |
|---|---|
| Print Speed (Black/A4) | 25 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed (A4) | 25 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Type | Digital |
| Functions | Copier, Printer, Scanner |
| Original Size | A3 |
| Paper Sizes | A3 |
| Supported Operating Systems | Windows 2000/XP |
