What to do if my Konica Minolta All in One Printer says to close the section indicated by the arrow?
If your Konica Minolta All in One Printer shows a message indicating that you need to properly close a section indicated by an arrow, it means that a door or cover is open. Ensure that all doors and covers are properly closed.
What to do if Konica Minolta All in One Printer says maximum copies reached?
If your Konica Minolta All in One Printer displays a message indicating that the maximum number of copies allowed for the registered account has been reached, it means that you have reached the total amount of copies as set by the administrator. Ask the administrator to clear the number of copies.
Why Konica Minolta Di3010 All in One Printer says not enough memory?
If your Konica Minolta All in One Printer displays a message saying 'Cannot XXXXXXXX (not enough free memory),' it means the memory is full, preventing further scanning. Print pages or delete queued jobs to clear some memory.
What to do if Konica Minolta Di3010 says maximum print jobs reached?
If your Konica Minolta All in One Printer displays a message indicating that the maximum number of jobs to be printed has been reached, it means that you have reached the total amount of jobs to be printed as set by the administrator. Ask the administrator to clear the number of jobs to be printed.
Why Konica Minolta Di3010 All in One Printer is paused?
If your Konica Minolta All in One Printer is paused, when making 2in1 copies, the second document page could not be scanned while scanning manually. Position the second document page or press [Finish].
Why this mode cannot be selected on Konica Minolta Di3010?
If your Konica Minolta All in One Printer displays the message 'This mode cannot be selected with XXXXXXXX', it means that functions that cannot be used together are selected. Make copies using only one of the functions.
Why are there dark spots on my Konica Minolta All in One Printer prints?
Dark specks, spots, or streaks on your Konica Minolta All in One Printer output usually indicate a dirty original glass or document pad. Try wiping the glass with a dry, soft cloth. If that doesn't work, clean the document pad with a soft cloth dampened with a mild detergent.
What to do if nothing appears on the Konica Minolta All in One Printer touch panel?
If nothing appears on the touch panel of your Konica Minolta All in One Printer, it might be in Energy Saver or Sleep mode. Press any key on the operation panel to cancel it. Alternatively, the printer might not be turned on. Check that the power switch is set to āIā and the sub power switch has been pressed in.
Why is the print blurry on my Konica Minolta All in One Printer?
Blurry output from your Konica Minolta All in One Printer can be due to damp paper. Try replacing the paper. It could also be that the document wasn't pressed closely enough against the original glass. Make sure to position the document correctly.
What to do if Konica Minolta All in One Printer says not enough memory?
If your Konica Minolta All in One Printer displays an error indicating not enough free memory, print or delete queued jobs to clear some memory.
Explains the division of the user manual into Basic and Advanced Operations volumes.
Details symbols, warnings, cautions, and text formats for user guidance.
Lists and describes the various parts and optional accessories of the copier.
Details specific part names of the copier and its options for identification.
Duplicates individual pages of a book/magazine onto double-sided copies.
Copies document pages into a booklet format for easy assembly.
Staples sets of copies together automatically after printing.
Explains double-sided and 2in1 copying for paper economization.
Identifies and explains the function of each key and component on the control panel.
Reviews currently selected settings and provides procedures to change them.
Provides step-by-step instructions for powering the copier on and off correctly.
Explains the touch panel interface, screens, and basic operation.
Step-by-step guide on performing standard copying procedures with the machine.
Instructions on how to stop, restart, or delete an ongoing copy job.
Explains how to pause the current copy job to perform another task.
Outlines the types, sizes, and capacities of paper supported by the copier.
Lists paper types that should not be used to avoid damage or poor print quality.
General guidelines and precautions for loading paper into different trays.
Explains how to select the paper loaded in drawers or the bypass tray for copying.
Guidelines for feeding documents into the duplexing document feeder.
Warns about document types unsuitable for the feeder and suggests using the original glass.
Instructions for correctly placing documents on the glass for scanning.
Describes document feed methods and copy settings for various applications.
Explains options like sorting, grouping, stapling, and hole punching for output.
Explains how to enlarge or reduce copies using various zoom settings.
Explains settings for original document type and desired copy output.
Guides on adjusting copy density for text, photos, or mixed documents.
Details the procedure for replacing the toner bottle when the message appears.
Identifies locations of paper misfeeds and how to clear them.
Explains how to clear jammed staples when the finisher is installed.
Provides a table of common error messages, their causes, and remedies.
Lists symptoms of incorrect copies and their possible causes and solutions.
Addresses issues where the copier is unresponsive or not functioning as expected.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Resolution | 600 x 600 dpi |
| Original Size | A3 |
| Warm-Up Time | Less than 30 seconds |
| Zoom Range | 25% - 400% |
| Interface | USB 2.0, Ethernet |
| Scanner Type | Flatbed, ADF |
| Warranty | 1 year |
| Monthly Duty Cycle | 100, 000 pages |
| Print Speed | 30 ppm |
| Copy Speed | 30 cpm |
| Paper Sizes | A3, A4, A5, B4, B5, Letter, Legal |
| First Copy Time | 6.5 seconds |
| Network Connectivity | Ethernet |
| Supported Operating Systems | Windows, Mac, Linux |
To Next Page
