Why won't my Konica Minolta All in One Printer print with PostScript3?
If your Konica Minolta All in One Printer prints correctly with the standard printer language PCL but fails with PostScript3, even for the PS Demo Page, it indicates that the PostScript3 Protection Kit is not correctly installed. Try reinserting the PostScript3 Protection Kit. If the problem persists, replace it with a new one.
What to do if Konica Minolta DF-606 test print is OK, but user jobs won't print?
If the Konica Minolta All in One Printer produces test prints but fails to print user jobs, the issue may stem from a software error within the print controller’s software or application program. To address this, save the problematic file to a disk and analyze it to identify the cause.
How to fix Konica Minolta DF-606 when test print works, but not from parallel port?
If the Konica Minolta All in One Printer produces test prints but not from the parallel port, the issue might be with the parallel port itself, the cable, or the computer. Check the internal and external cables. Test the connection using a data generator or a verified PC/I/O cable. If necessary, replace the system board.
What to do if Konica Minolta DF-606 All in One Printer print controller does not start?
If the Konica Minolta All in One Printer does not start the print controller, the system board might be inactive, or the controller board connector may be loose. Check the connector of the controller board. If necessary, replace the system board. Alternatively, the software of the print controller may be defective, requiring a reinstallation.
Why is my Konica Minolta All in One Printer printing defective output, or not printing at all?
If your Konica Minolta All in One Printer produces defective printouts or nothing prints at all, it suggests that the system board or other boards of the copier are defective. To resolve this, put the copier in service mode and perform a test. If it operates correctly in service mode, the system board may be faulty.
Why does my Konica Minolta DF-606 say "Warming up" and not disappear?
If the Konica Minolta All in One Printer displays “Warming up” continuously, it indicates a copier malfunction. You should locate the cause of the trouble of the copier.
Why is the [Controller] key grayed out on my Konica Minolta All in One Printer?
If the [Controller] key on the Utility Menu screen of your Konica Minolta All in One Printer remains grayed out for 15 minutes after powering on, it suggests that there is no power supply to the print controller. Check if the print controller is properly connected to the copier.
Details manual revisions, including revision marks and notes on changes.
Details the auto feeder's type, functions, and specifications.
Covers periodic checks and maintenance procedures for various sections.
Covers items not allowed for disassembly and part removal procedures.
Details mechanical adjustments for paper feed and alignment.
Details manual revisions, including revision marks and notes on changes.
Details the finisher's type, functions, and specifications.
Covers periodic checks for conveyance, stacker, and stapler sections.
Lists parts for disassembly and removal procedures.
Details mechanical adjustments for bypass gate, shift, paper exit, and alignment.
Details manual revisions, including revision marks and notes on changes.
Provides product specifications including type and functions.
Covers service tool, firmware updates, and disassembly/reassembly.
Details Tech Rep mode for various adjustments and settings.
Addresses printing system issues, symptoms, causes, and remedies.
Details manual revisions, including revision marks and notes on changes.
Provides product specifications including type and functions.
Covers periodic checks for paper feed, separation, and gear replacements.
Lists parts for disassembly and removal procedures for covers and wires.
Details mechanical adjustments for roller pressure, centering, skew, and height.
Details manual revisions, including revision marks and notes on changes.
Provides product specifications including type and functions.
Covers periodic checks for paper feed section and other parts.
Details PI displacement and tilt adjustments.
Details manual revisions, including revision marks and notes on changes.
Provides product specifications including type, functions, and paper types.
Covers periodic checks, disallowed disassembly, and removal procedures.
Details mechanical adjustments for punch hole position and sensor sensitivity.
Details manual revisions, including revision marks and notes on changes.
Provides product specifications including type, functions, and capacity.
Covers periodic checks for waste toner conveyance and recycle sections.
Details manual revisions, including revision marks and notes on changes.
Provides product specifications including type, functions, and paper handling.
Covers periodic checks for blade section and other parts.
Covers items not allowed for disassembly and part removal procedures.
Details mechanical adjustment for sheet trimming parallelism.
Details manual revisions, including revision marks and notes on changes.
Provides product specifications including type, functions, and paper handling.
Covers periodic checks for punch clutch, conveyance motor, and other parts.
Covers disallowed disassembly and removal procedures for ZU and punch unit.
Details mechanical adjustments for sensors, solenoids, and folding skew.
General| Brand | Konica Minolta |
|---|---|
| Model | DF-606 |
| Category | All in One Printer |
| Language | English |
To Next Page