What to do if my Konica Minolta All in One Printer says to close the section indicated by the arrow?
If your Konica Minolta All in One Printer shows a message indicating that you need to properly close a section indicated by an arrow, it means that a door or cover is open. Ensure that all doors and covers are properly closed.
What to do if Konica Minolta DI2510 says maximum copies reached?
If your Konica Minolta All in One Printer displays a message indicating that the maximum number of copies allowed for the registered account has been reached, it means that you have reached the total amount of copies as set by the administrator. Ask the administrator to clear the number of copies.
Why Konica Minolta All in One Printer says not enough memory?
If your Konica Minolta All in One Printer displays a message saying 'Cannot XXXXXXXX (not enough free memory),' it means the memory is full, preventing further scanning. Print pages or delete queued jobs to clear some memory.
What to do if Konica Minolta DI2510 says maximum print jobs reached?
If your Konica Minolta All in One Printer displays a message indicating that the maximum number of jobs to be printed has been reached, it means that you have reached the total amount of jobs to be printed as set by the administrator. Ask the administrator to clear the number of jobs to be printed.
Why Konica Minolta DI2510 is paused?
If your Konica Minolta All in One Printer is paused, when making 2in1 copies, the second document page could not be scanned while scanning manually. Position the second document page or press [Finish].
Why this mode cannot be selected on Konica Minolta DI2510 All in One Printer?
If your Konica Minolta All in One Printer displays the message 'This mode cannot be selected with XXXXXXXX', it means that functions that cannot be used together are selected. Make copies using only one of the functions.
Why are there dark spots on my Konica Minolta All in One Printer prints?
Dark specks, spots, or streaks on your Konica Minolta All in One Printer output usually indicate a dirty original glass or document pad. Try wiping the glass with a dry, soft cloth. If that doesn't work, clean the document pad with a soft cloth dampened with a mild detergent.
What to do if nothing appears on the Konica Minolta All in One Printer touch panel?
If nothing appears on the touch panel of your Konica Minolta All in One Printer, it might be in Energy Saver or Sleep mode. Press any key on the operation panel to cancel it. Alternatively, the printer might not be turned on. Check that the power switch is set to “I” and the sub power switch has been pressed in.
Why is the print blurry on my Konica Minolta All in One Printer?
Blurry output from your Konica Minolta All in One Printer can be due to damp paper. Try replacing the paper. It could also be that the document wasn't pressed closely enough against the original glass. Make sure to position the document correctly.
What to do if Konica Minolta All in One Printer says not enough memory?
If your Konica Minolta All in One Printer displays an error indicating not enough free memory, print or delete queued jobs to clear some memory.
General| Printing Technology | Laser |
|---|---|
| Print Speed (Black/A4) | 25 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed (A4) | 25 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Type | Digital |
| Functions | Copier, Printer, Scanner |
| Original Size | A3 |
| Paper Sizes | A3 |
| Supported Operating Systems | Windows 2000/XP |
Explains the manual's division into volumes and explains manual conventions and symbols.
Defines terms like 'Width' and 'Length', and explains orientation, display, and paper supply icons.
Details the various optional and standard components of the copier and their functions.
Identifies and describes the parts of the copier, including the touch panel and output tray.
Step-by-step guide to copying pages from books or magazines onto double-sided copies.
Procedure for copying documents to create a booklet format, requiring duplexing document feeder.
Instructions for automatically stapling sets of copies using the finisher and sort/group settings.
Techniques for economizing paper through double-sided and 2in1 copying methods.
Guidance on using Energy Save and Sleep modes to conserve energy.
Identifies and explains the function of each key and component on the copier's control panel.
How to review, change, and store current copier settings using the Mode Check function.
Customizing settings for easier use, such as screen display and key speed settings.
Detailed steps for powering the copier on and off, including sub power switch operation.
Instructions on how to adjust the control panel to three different angles for optimal viewing.
Overview of the touch panel interface, default settings, and operating procedures.
Details on supported paper types, sizes, and their availability across different paper sources.
Lists paper types that should not be used to avoid print quality issues or machine damage.
Specifies the margins on a page that are not copied, indicating the printable area.
Guidelines for storing paper correctly to maintain quality and prevent issues.
Explains how the copier automatically selects paper from another drawer when one runs out.
Instructions for loading paper into the paper drawers, large capacity cabinet, and bypass tray.
How to choose the paper loaded in a drawer or the bypass tray for copying jobs.
Information on document types, uniform sizes, and mixed width detection for the document feeder.
Steps for loading documents into the duplexing document feeder for copying or faxing.
Guidance on correctly placing sheet, transparent, and bound documents on the glass.
Table detailing document feed methods and copy settings for various applications.
Precautions for copying large documents, including orientation and finishing limitations.
Details on available finishing options like Non-Sort, Sort, Group, Corner Staple, and Hole Punch.
Covers various zoom options including Auto Size, Full-Size, Enlarge, Reduce, CustomZoom, and X/Y Zoom.
Options for matching original document types (single/double-sided) to copy output.
Instructions for adjusting copy density using Text, Photo, or Text/Photo settings.
Indicates low toner and provides guidance on replacing the toner bottle.
Appears when toner is empty; details the process for replacing the toner bottle.
Indicates an empty staple cartridge and provides instructions for replacement.
Identifies common paper misfeed locations and provides step-by-step clearing instructions.
Occurs when staples are jammed; provides procedures to clear jammed staples.
Indicates the punch box is full and needs emptying.
Lists common error messages, their causes, and recommended remedies.
Diagnoses issues causing light, dark, or blurry copies and provides solutions.
Addresses issues like blank touch panel, non-responsive keys, or inability to start copying.
To Next Page
