165mm+-2
122mm+-2
22
23
Under Shooting Mode ( )
Setting Focus Range
Turning the TFT LCD Monitor On or Off (Preset: On)
Setting Flash Mode (Preset: Auto Flash)
Advanced Functionality Settings Advanced Functionality Settings
Setting Self-timer (Preset: Off)
The self-timer
starts and counts
10 seconds.
down for
The self-timer
is automatically
cancelled once the picture has
been taken.
Setting Digital Zoom
The zoom bar, appearing on the left
of the TFT LCD monitor, shows the
current digital zoom position.
Note
Generally speaking, the digital zoom image quality is less sharp than that of
non-digital zoom.
9
SET
SET
SET
Macro : 0.2m
Normal : 0.8m~infinity
( )
( )
The flash fires automatically as required by the shooting mode.
If the subjects eyes will appear in the picture, using this mode can
effectively minimize the likelihood of the red-eye effect.
The flash will flash and the exposure time is set to 1/4 second so
that the subject in the foreground and the background are properly
exposed.
This mode will enable the flash to fire in any circumstances.
This mode will prevent theflash from firing in any circumstances.
Auto Flash
Auto Flash with
Red-eye Reduction
Night Scene
Fill-in Flash
Flash Off
You can change the icon display
on the TFT LCD Monitor, turn it
off, and turn it on again by pressing
the LCD button repeatedly.
You can select the flash mode
shown below according to the
environment.
Setting Digital Zoom ( 4X continuous )
To Next Page
Loading...
Need help?
General
