Digital Camera >>
48-E
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
Protecting Images
1. Slide the mode switch to [ ].
2. Select the image that you want to protect
with the / buttons.
3. Press the MENU button.
The playback menu is displayed.
4. Select [Protect] with the / buttons, and
press the SET button.
5. Select [Single] or [All] with the /
buttons, and press the SET button.
6. Select [Set] with the / buttons, and
press the SET button.
Protect is executed and the camera
returns to the play mode.
The protect icon [ ] is displayed with
protected images. When [All] has been
selected, [ ] is displayed with all the
images.
Select Item
Select Page
Adjust
Select
Enter
To Next Page
Loading...
