EasyManuals Logo

Konica Minolta DiMAGE E40 User Manual

Konica Minolta DiMAGE E40
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
User’s Manual >>
E-57
Still Image Menu (Function)
1. Slide the mode switch to [ ].
2. Press the MENU button, and select the
[Function] menu with the button.
[Function] of the still image menu is
displayed.
3. Select the desired [Function] option item
with the / buttons, and press the SET
button to enter its respective menu.
4. Select the desired setting with the /
buttons, and press the SET button.
5. To exit from the still image menu, press
the MENU button.
Capture Mode
This sets the recording method at the time of taking pictures.
[Blank] Single: Takes one photograph at a time.
[
] Continuous: Permits continuous photography of 3 pictures max, at
the fastest interval of 0.5 seconds.
[AEB] Auto Exp.: Effective when it is difficult to determine the exposure for
continuous photography with exposure at the 3 levels of
standard exposure (0), underexposure (-0.67) and
overexposure (+0.67) compensation.
In continuous photography, press and hold the shutter button until 3
images have been captured. If the shutter button is released earlier,
the continuous photography will end at that point.
Adjust

Table of Contents

Other manuals for Konica Minolta DiMAGE E40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Konica Minolta DiMAGE E40 and is the answer not in the manual?

Konica Minolta DiMAGE E40 Specifications

General IconGeneral
BrandKonica Minolta
ModelDiMAGE E40
CategoryDigital Camera
LanguageEnglish

Related product manuals