User’s Manual >>
E-49
Canceling the Protection
To cancel protection for only one image, display the image that you want to
remove the image protection.
1. Select [Protect] with the / buttons from the playback menu, and press
the SET button.
2. Select [Single] or [All] with the / buttons, and press the SET button.
3. Select [Cancel Protect] with the / buttons, and press the SET button.
The removal of image protection is executed and the camera returns to
the play mode.
Protecting multiple images simultaneously
1. Select [Protect] with the / buttons from the playback menu, and press
the SET button.
2. Select [Select] with the / buttons, and press the SET button.
The images are displayed in the thumbnail display.
3. Select the image you want to protect with the / / / buttons, and
press the button.
The protect icon [ ] is displayed with protected images. Selecting a
protected image and pressing the button again will cancel the
protection. This procedure is repeated to select multiple images.
4. Press the SET button.
Protection and cancellation the protection are executed and the camera
returns to the play mode.
Formatting the SD card undoes the protection, and erases all images.
To Next Page
Loading...
