What to do if Konica Minolta DiMAGE Z20 Digital Camera pictures are too dark with flash?
If your Konica Minolta Digital Camera pictures are too dark when using the flash, it might be because the subject is too far away. Try moving closer to the subject. Alternatively, you can increase the camera's sensitivity setting.
Why are my Konica Minolta DiMAGE Z20 Digital Camera pictures not sharp?
If your Konica Minolta Digital Camera pictures are not sharp, several factors could be the cause. It could be that the subject is too close – ensure the subject is within the autofocus range or try using the macro mode. Alternatively, the camera might be in macro mode; if so, cancel this setting. Also, the autofocus system might be struggling to focus; in this case, use the focus-lock function or switch to manual focus.
How to fix blurred Konica Minolta Digital Camera pictures in low light?
If you're taking pictures indoors or in low light without a flash and the images from your Konica Minolta Digital Camera are blurred, it's likely due to slow shutter speeds. To fix this, use a tripod to stabilize the camera. You can also try increasing the camera's sensitivity setting or using the flash.
Camera Sensor| CCD type | 1/2.5-type interline primary-color CCD |
|---|---|
| Number of effective pixels | 5.0 million |
| Total number of pixels | 5.2 million |
Battery| Battery type | Four AA alkaline or Ni-MH batteries |
|---|---|
| Battery performance (recording) | Approximately 450 frames |
| Battery performance (playback) | 700 minutes with alkaline batteries |
Camera Lens| Lens construction | 11 elements in 9 groups |
|---|---|
| Maximum aperture | f/3.2 - f/3.4 |
| Focal length | 6 - 48 mm (35mm equivalent: 36 - 290 mm) |
Operating Conditions| Operating temperature | 0° - 40°C / 32° - 104°F |
|---|---|
| Operating humidity | 5 - 85% (noncondensing) |
| Optional external power source | AC Adapter AC-11 |
Dimensions and Weight| Dimensions | 109 (W) X 82 (H) X 94 (D) mm |
|---|---|
| Dimensions (inches) | 4.29 (W) X 3.23 (H) X 3.70 (D) in. |
| Weight | Approximately 300g / 10.6 oz. |
Critical safety warnings regarding battery use, electrical shock, and product handling.
Step-by-step instructions for correctly inserting AA batteries into the camera.
Procedure for inserting and ejecting memory cards to expand storage capacity.
Instructions for setting the camera's internal clock and calendar for accurate image data.
Step-by-step guide on how to focus, expose, and capture images.
Overview of different flash modes like autoflash, red-eye reduction, and fill-flash.
Information on the camera-shake warning and how to avoid blurred images.
How to manually control both shutter speed and aperture for full exposure control.
How to adjust white balance for accurate color reproduction under different lighting conditions.
How to adjust ISO sensitivity for low-light conditions and its impact on image noise.
How to restore all camera functions and settings to their factory defaults.
Detailed steps for establishing a USB connection between the camera and a computer.
Safe procedures for disconnecting the camera from a computer to prevent data loss.
How to print images directly from the camera to a PictBridge compatible printer.
Common camera problems and their solutions for basic operation.
Guidelines for maintaining and storing the camera to ensure longevity.
Detailed technical specifications and features of the DiMAGE Z20 camera.
To Next Page