89
LENS ACCESSORY
This camera is compatible with the optional Wide-Angle
Converter ZCW-300 Kit. This kit contains a 0.75X wide-
angle converter, which reduces the focal length of the
zoom lens’ wide-angle position giving it the equivalent of a
26mm lens on a 35mm camera.
When the converter is mounted, the lens accessory option
in section 1 of the setup menu should be set to
“WideConvertr.” An indicator (W) appears in the top left
corner of the monitor as a warning. Refer to the converter
manual for more information.
Single still images can be previewed immediately after being captured without instant
playback active. Simply continue to hold the shutter-release button down after taking the
picture to display the image. Release the shutter button to end the playback.
Camera Notes
LANGUAGE
The language used in the menus can be changed in section 1 of the setup menu. See
page 19 for details.
If file number memory is selected, when a new folder is
created or a new memory card is used, the next image
recorded will have a file number one greater than the last
file saved. If the new card contains an image with a greater
file number, the new image will be assigned a file number
one greater than the greatest on the card. If the file number
memory is disabled, the image file number is reset to 0001
when saved in a new folder or card. File number memory is
activated in section 2 of the setup menu.
FILE NUMBER (#) MEMORY
File # memory
Folder name
Date imprint
Off
Std. form
On
–
Off
Date/Time set
Noise reductn
To Next Page
Loading...
Need help?
General
