Konica Minolta magicolor 7450 II User Manual (English)

Other manuals for Konica Minolta magicolor 7450 II

User Guide252 pages

Specifications2 pages

Installation Guide12 pages

Brochure & Specs4 pages

Safety Information Guide48 pages

Questions and Answers:

D
Desiree WadeAug 23, 2025
What to do if Konica Minolta magicolor 7450 II Printer shows a media misfeed message?
- E
  Emma WilkinsAug 25, 2025
  If your Konica Minolta printer displays a media misfeed message, it could be due to these reasons: * The right side cover needs to be opened and closed again to reset the printer, you should open and close the right side cover of the printer again. * Some media remains misfed in the printer, you should recheck the media path and make sure that you have removed all of the misfed media.
K
Kathy SmallAug 25, 2025
What to do if pages are not correctly collated or the print job is cancelled from Acrobat Reader on Konica Minolta Printer?
- C
  Craig FloresAug 26, 2025
  If a printing error occurs with Acrobat Reader, print using the Preview application provided by the operating system.
J
Jamie BrownAug 26, 2025
What to do if media is misfeeding in my Konica Minolta Printer?
- R
  Rachael MoyerAug 27, 2025
  To address media misfeeding in your Konica Minolta Printer: * Ensure the media is correctly positioned in the tray. * Reduce the number of sheets to the maximum allowed. * Adjust the media guides to match the media size. * Remove warped or wrinkled media. * Replace moist media with dry media. * Use Tray 1 or 2 for special media. * Load transparencies or label sheets according to the manufacturer’s instructions. * Ensure envelopes are loaded with flaps facing up in Tray 1.
T
trandeborahAug 27, 2025
How to prevent several sheets going through Konica Minolta magicolor 7450 II together?
- A
  Ashley KlineAug 27, 2025
  If several sheets go through your Konica Minolta Printer together, it might be because the front edges of the media are not even, the media is moist, or there's too much static electricity. Remove the media, even the front edges, and reload it. If the media is moist, replace it with dry media. Avoid fanning transparencies to reduce static electricity.
T
Todd SullivanAug 28, 2025
What to do if media misfeed message stays on Konica Minolta magicolor 7450 II Printer?
- G
  gbennettAug 29, 2025
  If the media misfeed message persists on your Konica Minolta Printer, try opening and closing the right side cover again to reset the printer. Also, recheck the media path and ensure all misfed media has been removed.
N
Natalie KingAug 30, 2025
What to do if the Konica Minolta magicolor 7450 II power is not on?
- B
  Brian LopezAug 30, 2025
  If your Konica Minolta printer isn't powering on, check these potential causes: 1. Ensure the power cord is correctly plugged into the outlet. If not, turn off the printer, plug the power cord in correctly, and turn the printer back on. 2. Test the outlet by plugging another electrical appliance into it to see if it operates properly. 3. Verify the power switch is in the correct position (I position). If it's not, turn the power switch off (O position), then turn it back to the on (I position). 4. Confirm that the printer is connected to an outlet with the correct voltage and frequency matching the printer's specifications.
O
Oscar AllenAug 31, 2025
Why are several sheets going through my Konica Minolta Printer together?
- T
  Tara AguilarAug 31, 2025
  If several sheets are going through your Konica Minolta printer at once, here are a few possible causes: * The front edges of the media are not even, you should remove the media and even up the front edges, then reload it. * The media is moist from humidity, you should remove the moist media and replace it with new, dry media. * Too much static electricity is present, you should not fan transparencies.
R
Robert PattersonSep 1, 2025
Why is my Konica Minolta Printer duplex option misfeeding?
- M
  Matthew GomezSep 1, 2025
  The duplex option on your Konica Minolta printer might misfeed because: * Unsupported media (wrong size, thickness, type, etc.) is being used, you should use KONICA MINOLTA-approved media. * Only plain paper, 60–90 g/m2 (16–24 lb) and thick paper, 91–256 g/m2 (25–68.1 lb) can be autoduplexed, you should make sure that you have not mixed media types in Tray 1. * Envelopes, labels, thick stock, or transparencies are being duplexed, you should ensure that your media is appropriate for duplexing. * Media is still being misfed, you should recheck the media path inside the duplex option and make sure that you have removed all of the misfed media.
M
Melissa EstradaSep 3, 2025
Why Konica Minolta Printer power is not on?
- G
  Gabriel HamptonSep 3, 2025
  If your Konica Minolta Printer isn't powering on: 1. Ensure the power cord is correctly plugged into the outlet. If it isn't, turn off the printer, plug the power cord in correctly, and then turn the printer back on. 2. Check the outlet by plugging in another appliance to see if it works. 3. Make sure the power switch is in the 'I' (on) position. If it isn't, switch it to 'O' (off) and then back to 'I' (on). 4. Verify that the power source matches the printer's specifications.
J
Jonathan RichSep 4, 2025
How to fix static electricity on transparencies in Konica Minolta magicolor 7450 II?
- M
  melissamitchellSep 4, 2025
  Remove the transparencies and load them in the tray one sheet at a time. Do not fan transparencies before loading them.

Konica Minolta magicolor 7450 II Specifications

General

Wi-Fi	-
Network ready	Yes
Print technology	Laser
Maximum resolution	9600 x 600 DPI
Time to first page (black, normal)	8.2 s
Time to first page (color, normal)	11.4 s
Print speed (black, normal quality, A4/US Letter)	24.5 ppm
Maximum duty cycle	120000 pages per month
Page description languages	PCL 6, PostScript 3
Memory type	DDR2
Maximum internal memory	1024 MB
Total input capacity	100 sheets
Total output capacity	350 sheets
Maximum input capacity	1850 sheets
Multi-Purpose tray input capacity	250 sheets
Maximum print size	216 x 297 mm
Paper tray media types	Envelopes, Plain paper, Transparencies
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B4, B5, B6
Borderless printing media sizes	Legal, Letter
Maximum ISO A-series paper size	A3
Standard interfaces	Parallel, USB 2.0
Optional connectivity	Ethernet
Compatible operating systems	Windows XP, Vista, 7 Mac 9.1+ Linux
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	130 W
Power consumption (printing)	1450 W
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	10 - 35 °C