Konica Minolta Sindoh N502 User Manual

2016. 3
Ver. 1.02
This Service Manual (Ver. 1.02) describes
bizhub 367/bizhub 287/bizhub 227/bizhub 136DN/bizhub 128DN/
bizhub 122DN/ineo 367/ineo 287/ineo 227/Sindoh N502/
Sindoh N501/Sindoh N500/Sindoh MF3091/Sindoh MF2101/
Sindoh MF2041/Sindoh N512/Sindoh N511/Sindoh N510/
Sindoh N517/Sindoh N516/Sindoh N515
(Version: G00-27)
SERVICE MANUAL
SECURITY FUNCTION
367/287/227

Konica Minolta Sindoh N502 Specifications

General

Brand	Konica Minolta
Model	Sindoh N502
Category	All in One Printer
Language	English

Summary

Installation of the machine and steps to be performed before operation

Unpacking and setting up the machine

Installing and replacing the hard disk

Make the necessary settings

Performing Non-Image Area Erase Check

Network setting

Switch setting for secured start

Setting for Custom Function Pattern Selection

Precautions for operation control

Requirements of the service engineer

Protection of setting data in Service Mode

Machine maintenance control

Accessing the Service Mode

Access method to the Service Mode

Step-by-step guide to enter the service mode.

Access lock of Service Mode

Enhancing the security function

Details of settings

Lists specific settings related to security enhancement.

Service Mode functions

CE Authentication function

Steps to enable and configure the CE Authentication function.

Administrator Password function

Process for setting or changing the administrator password.

CE Password function

Process for setting or changing the CE password.

HDD installation setting

Operation ban release time setting

Administrator Unlocking function

Overwrite All Data function

Overwrite All Data procedure

Steps to overwrite and delete all data on the HDD.

Items to be cleared by Overwrite All Data

Lists all data that is cleared by the Overwrite All Data function.

Firmware rewriting

Procedure