Why does my Konica Minolta Medical Equipment show a DEV Temp. Error?
The DEV Temp error on your Konica Minolta Medical Equipment indicates that the heater temperature levels have either risen abnormally above or remained below the preset values for an extended period. To address this, first, press the Power Breaker OFF. Then, check to ensure that the developer is circulating correctly.
What to do if my Konica Minolta Medical Equipment displays a Motor Error?
A Motor Error on your Konica Minolta Medical Equipment typically means the rack drive motor is overloaded. To resolve this: * Press the Power Breaker OFF. * Inspect the rack roller or gear mechanisms for any jammed film or foreign objects.
What to do if my Konica Minolta Medical Equipment displays a Film Sensor Error?
If a Film Sensor Error occurs on your Konica Minolta Medical Equipment, normal operation can be done after error occurring. However, if the error repeats, report it to the Konica service station due to potential solute deposits on the lever.
Safety guidelines for normal operation, covering high voltage, foreign objects, and electrical checks.
Safety measures for proper setup, including power supply, cord placement, grounding, and ventilation.
Step-by-step instructions for initiating and performing the film processing cycle.
Procedure for daily insertion of cleaning film to maintain optimal processing quality.
Guidelines for loading exposed medical film into the processor for development.
Troubleshooting common motor and temperature errors indicated by panel lamps and alarms.
A checklist for diagnosing and resolving common processor operational issues before contacting service.
General| Brand | Konica Minolta |
|---|---|
| Model | SRX-101A |
| Category | Computer Hardware |
| Language | English |
To Next Page
