20 OPERATION MANUAL
TROUBLESHOOTING
d
Is the DEV temperature correct?
d
Has the DEV solution been
replaced on schedule?
d
Is the DEV replenishment
function working properly?
d
Call the authorized KONICA
dealer.
Density of the processed
film is too low.
Film is being scratched.Processed film is dirty.
d
Have cleaning films been
processed before starting the
operation?
d
Have racks and rollers been
cleaned once every week?
d
Have chemical solutions been
replaced regularly?
d
Are the DEV and FIX replenishment
functions working properly?
d
Is the wash tank filled at the
beginning of the work day and
drained at the end of the day?
d
Call the authorized KONICA
dealer.
d
Is there any unusual noise or any
vibration in the processor?
d
Are the racks properly set in the
tanks?
d
Are the processing tanks dirty?
d
Have any foreign objects fallen
into the tanks?
d
Are there any cracked or
damaged gears on the rack or
any missing springs?
d
Are the rack rollers rotating
smoothly?
d
Call the authorized Konica
dealer.
To Next Page
