Konnwei KW710 - Page 8

KW710
usually uses one or more standard systems.
KW710 battery tester each battery according to the selected system and
rating.
Use UP/DOWN key to select according to the actual system standard and
rating marked on the battery.
Battery
Standard
Description
Range
CCA
Cold Cranking Amps, specified by SAE&BCI, most
frequently used value for starting battery at 0°F(-18 °C)
100–2000
JIS
Japan Industrial Standard, displayed on the battery as
combination of the numbers and letters, e.g. 55D23, 80D26
26A17-
245H2
EN
European Automobile Industry Association Standard
100–2000
DIN
German Auto Industry Committee Standard
100–1400
SAE
Society of Automotive Engineers Standard
100–2000
IEC
Internal Electron technical Commission Standard
100–1400
BCI
Battery Council international standard
100-2000
CA
Cranking Amps standard, effective starting current
value at 0°C
100-2000
MCA
Marine Cranking Amps standard, effective starting current
value at 0°C
100-2000
1.Battery rating: up/down button to select rating, press and hold the up/down
button to speed up the scrolling speed.
2.Press the Enter key to start the test. After a few seconds, the tester
displays the result of the battery test and the measured voltage.
3.The tester can also display the type and specifications of the battery
tested.