Need help?Do you have a question about the Korenix JetNet 5010G Series and is the answer not in the manual?
General| Switch Capacity | 20Gbps |
|---|---|
| MAC Address Table | 8K |
| Jumbo Frame | 9K Bytes |
| Port Type | RJ45, SFP |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% to 95% (non-condensing) |
| Mounting | DIN-Rail Mounting |
| Ports | 8 x 10/100/1000Base-T(X), 2 x 100/1000Base-X SFP |
Explains how to connect the redundant DC power inputs to the switch.
Details setting up and accessing the switch via its web management interface.
Covers system name, IP, admin password, time, and backup/restore configuration.
Details configuring port states, auto-negotiation, speed, duplex, and flow control.
Explains STP, RSTP, MSTP, and Multiple Super Ring protocols for network resilience.
Covers Virtual LAN setup, including 802.1Q, QinQ, GVRP, and Private VLANs.
Describes the setup and configuration of Private VLANs for port isolation and security.
Explains Quality of Service settings for prioritizing network traffic.
Explains Port Security, IP Security, and 802.1X authentication for network access control.
To Next Page
