1 Introduction
Welcome to Korenix JetNet 5010G Series Industrial Managed Ethernet Switch User
Manual. Following topics are covered in this chapter:
1.1 Overview
1.2 Major Features
1.3 Package Checklist
1.1 Overview
JetNet 5010G series, Industrial 10-port Managed Ethernet Switches, have 7 10/100Base-TX ports
and 3 combo ports, respectively 10/100/1000 RJ-45 / 100-FX / Gigabit SX/LX. JetNet 5010G is
especially designed to operate under harsh environmental conditions. The switches provide solid
foundation for a highly fault-tolerant and easily-managed network. JetNet 5010G can be remotely
configured by Telnet, Web browser, JetView and managed by Simple Network Management
Protocol (SNMP) and Remote Monitoring (RMON). You can also connect the attached RS232
console cable to manage the switch by Command Line Interface (CLI). CLI commands are
Cisco-Like commands, your engineers who are familiar with Cisco products don’t need to learn
new rules for CLI commands.
Security is enhanced with advanced features such as 802.1Q VLAN and Port/IP security.
Performance is optimized by QoS and IGMP Snooping/Query. Korenix 3
nd
generation Ring
technology, Multiple Super Ring, enables superb self-healing capability for network failure. The
fastest failover time is enhanced from 300ms to 5ms for 10/100TX RJ-45 ports, and 30ms for
100FX and Gigabit Fiber. This is Korenix patented ring technology, which is registered in most
countries. For interoperability with your existed network, JetNet 5010G series also come with an
advanced redundant network solution, Ring Coupling and Rapid Dual Homing technology. With
Ring Coupling and Rapid Dual Homing technology, Ethernet Ring can be extended more easily.
No matter with Korenix switch or other managed switches.
The IP31-design aluminum case further strengthens JetNet 5010G's withstand ability in harsh
industrial environment. The event warning is notified to the network administrator via e-mail,
system log, or to field engineers by relay output. JetNet 5010G Series Industrial Managed
Ethernet Switch has also passed CE/ FCC/ UL safety certifications to help ensure safe and
reliable data transmission for industrial applications. JetNet 5010G Series will be your best option
for highly-managed industrial network.
1.2 Major Features
Korenix JetNet 5010G Series products have the following features:
SFP ports support 100/1000 Fiber with Digital Diagnostic Monitoring (DDM) to
monitor long distance fiber quality
To Next Page
Loading...
Need help?
General
