Multiple Super Ring (recovery time <5ms), Rapid Dual Homing, Multiple Ring, and
MSTP/RSTP
VLAN, Private VLAN, QinQ, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control,
Port Trunking, LACP, Online Multi-Port Mirroring
32Gbps Non-Blocking, switch backplane 8K MAC address table
Supports LLDP and JetViewPro i2NMS software for auto topology visualization and
efficient group management
Supports console CLI , Web, SNMP V1/V2c/V3, RMON, HTTPS, SSH for remote
management
Advanced security feature supports IP Security, Port Security
DHCP Server, IP and MAC Binding, 802.1x network access control
Event Notification by E-mail, SNMP trap, Syslog, Digital Input and Relay Output
Supports Modbus TCP/IP client for Factory Automation
Supports Multiple Language for Web User Interface
Dual 12-48VDC power inputs (before v2.2 hardware) , 10.5~60Vdc (v2.3 Hardware)
IP31 rugged aluminum case
Operating temperature -25~70°C for JetNet 5010G, -40~75°C for JetNet 5010G-w
(v2.3); For the UL 60950-1, the high temperature only support 60°C for all models
Note: The detail spec is listed in Appendix 5.1.
1.3 Package List
Korenix JetNet 5010G Series products are shipped with following items:
One industrial Managed Ethernet switch
One DIN-Rail clip (attached to the switch)
One wall mounting plate and 4 screws (M3 in 6 mm length)
One RS-232 DB-9 to RJ-45 console cable
Documentation and Software CD
Quick Installation Guide
If any of the above items are missing or damaged, please contact your local sales
representative.
To Next Page
Loading...
Need help?
General
