Basic functions > Playing a single sound (Single mode)
13
EnglishEnglish
Basic functions
Playing a single sound (Single mode)
When you turn the instrument on, it is in Single mode.
The single Grand Piano sound is selected, and plays over the
full keyboard. Its name is shown in the display:
You can replace it with any of the 40 sounds supplied with the
instrument. See the list of sounds in the following table (more
details on each sound are on page 274):
Selecting a sound
You can use the sound selection buttons to select a different
sound.
1. Press one of the sound selection buttons in order to select
a sound type.
The indicator on the button you pressed will light. The
name of the selected sound will appear in the display:
2. Use the BANK button to select one of the available banks
for the selected sound (see table above). When the last
bank has been selected, press it again to select the base
sound again.
As an alternative, use the +/YES button to scroll the sound
bank list forward; the -/NO button to scroll it backwards.
Main
GrandPiano 4/4
120
Main sound
Button
Sound
Bank 1 Bank 2 Bank 3 Bank 4 Bank 5 Bank 6
PIANO 1 GrandPiano* BriteGrand* Rock Piano Piano&Str.
PIANO 2 Honky-Tonk MelloGrand* Piano&Pad Elec.Grand M1 Piano
E.PIANO 1 Tine EP 1 SuitTineEP DynoTineEP Tine EP 2
E.PIANO 2 Dig. EP 1 Dig. EP 2 Reed EP TremReedEP
HARPSI/CLAV Harpsi 8' Harpsi 16' Clav Synth Clav
VIBES/GUITAR Vibes 1 Vibes 2 Nylon Gtr.
ORGAN1 Jazz Organ Perc.Org.1 Perc.Org.2
ORGAN2 Church Org Pipe Flute Pipe Tutti
STRINGS/CHOIR Strings Slow Str. String Pad Choir ScatVoices Vocal Pad
BASS Ac. Bass El. Bass Fretless B Bass&Ride
* Note: The EPx effects are not available when you are in Layer mode.
12345
678910
GrandPiano 4/4
120
Sound name
C540_Book.fm Page 13 Friday, September 14, 2007 12:12 PM
To Next Page
Loading...
