TIP: If desired, you can erase more than one loop
recorder bank at the same time.
TIP: Erasure will take the same length of time as the
length of the phrase that’s currently assigned.
When the phrase has been erased, the LOOP RE-
CORDER BANK button will light-up orange.
3. If you’re nished erasing phrases, press
the ERASE LOOP button and the button will
go dark.
TIP: You can press the ERASE LOOP button after
performing steps 1–2 to return to normal operation
while allowing erasure of the phrase to continue. The
LOOP RECORDER BANK button will blink red while
the data is being erased.
Erasing a portion of a phrase
Here’showyoucaneraseaspecicportionof
a recorded phrase.
While the phrase is playing, hold down the
LOOP RECORDER BANK button where you
want to selectively erase material, and press
the ERASE LOOP button. Material will be
erased from the phrase while you hold down
the ERASE LOOP button.
TIP: If you want to erase a phrase from its beginning,
stop playback of all phrases; then hold down the
LOOP RECORDER BANK button that you want to
erase, and press the ERASE LOOP button.
TIP: By using the touch pad to perform while you
erase,youcanselectivelyreplaceaspecicportion
of the recorded phrase.
Initializing a phrase
Here’s how to delete a recorded phrase, re-
turning the LOOP RECORDER BANK to its
initial status.
1. Hold down the SHIFT button and press the
ERASE LOOP button.
+
2. Press the LOOP RECORDER BANK but-
ton that you want to initialize.
3. Press the WRITE button; initialization of
the selected LOOP RECORDER BANK will
begin. When initialization is complete, the pro-
gram indication will reappear.
TIP:
Except for the audio input source, the KAOSSILA-
TOR PRO will not produce sound while a phrase is being
deleted.
To Next Page
Loading...
Need help?
General
