Korg M50 User Manual

13
MOTU – Digital Performer 5
1
2
Start up Digital Performer 5.
Create an instrument track. Start up “M50 Plug-In Editor.”
Instrument Track
3
Create a MIDI track. Choose “M50 Plug-In Editor” as the output of that MIDI track.
Tracks Windows – MIDI Track
4
To route the M50’s audio signal to Digital Performer 5, create an audio track or an AUX
track. On the input section of that track, select the audio interface input to which you’ve
connected the M50’s audio signal.
Tracks Windows
–
MIDI Track
5
If you’re routing the M50’s audio signal to an audio track, arm the REC button on so that
you can hear the audio signal.
If you are routing the M50’s audio signal to an AUX track, this step is not necessary.
Audio Track

Korg M50 Specifications

General

Polyphony	80 voices
Sound Engine	EDS (Enhanced Definition Synthesis)
Outputs	L/MONO, R, Headphones
MIDI	In, Out, Thru
Storage	SD card slot
Keyboard	61 keys, 73 keys, or 88 keys
Effects	2 master effects
Sequencer	16-track, 128 songs
Display	TouchView graphical interface
Arpeggiator	2 arpeggiators
Presets	608 Programs, 384 Combinations
Controllers	Joystick
Key Action	M50-61/73: Semi-weighted, M50-88: RH3 (Real Weighted Hammer Action 3)
Connectivity	USB