Need help?Do you have a question about the Korg opsix SE and is the answer not in the manual?
General| Type | Digital Synthesizer |
|---|---|
| Synthesis Method | FM (Frequency Modulation) |
| Oscillators | 6 operators |
| Arpeggiator | Yes |
| Keyboard | 37 keys |
| Effects | Reverb, Delay, Distortion, EQ |
| Controllers | Pitch Bend, Modulation Wheel |
| Sequencer | 16-step sequencer |
| MIDI | In/Out |
| USB | Type B |
| Power Supply | AC adapter (included) |
Safe operating locations for the synth, avoiding direct sun and extreme environments.
Connecting the AC adapter to the correct voltage outlet for safe operation.
Advice on operating the unit near radios and televisions to avoid interference.
Guidelines for safe handling and cleaning to prevent damage or malfunctions.
Instructions for keeping the manual and preventing liquids or metal objects from entering the unit.
USA specific warning regarding potential radio interference and compliance.
Details on the available documentation, including this Quick Start Guide and Owner's Manual.
Highlights key capabilities like FM synthesis, operator modes, filters, effects, sequencer, and keyboard.
Explains FM synthesis, operators, algorithms, and operator modes.
Overview of all knobs, buttons, and displays on the opsix SE front panel.
Steps for safely connecting the power adapter to the unit and an outlet.
Guide to connecting audio, MIDI, and pedal interfaces to the opsix SE.
Instructions for powering the opsix SE unit on and off safely.
Details on the automatic power-off feature and how to disable it.
Steps to select, play, and audition programs on the opsix SE.
How to use the built-in spectrum analyzer and oscilloscope for sound visualization.
Instructions for activating and using the arpeggiator function.
Using knobs and sliders to adjust operator ratios and levels for sound shaping.
Covers easy editing, randomized editing, and detailed parameter adjustments.
Procedure for saving edited programs, including naming and location.
How to play back and record sequences using the step sequencer.
Detailed steps for recording notes and ties into the step sequencer.
Instructions for restoring the opsix SE to its original factory default settings.
Detailed technical data including keyboard, polyphony, dimensions, and weight.
FM synthesis where modulator pitch affects carrier tonal character.
Modulator signal multiplies with carrier for volume changes.
Using a filter with key tracking, taking input from oscillator and modulator.
Creating a wah effect by modulating cutoff frequency with the modulator.
Generating harmonics by folding waveforms, mixing modulator and carrier signals.
Using operators as effects like delay or distortion with oscillator and modulator inputs.
To Next Page
