124| Recording MIDI Songs
Recording
Turn on the metronome
▪ Press the METRO (
) button to turn the metronome on or off while record-
ing. The metronome click will not be recorded with the Song.
Record
1 Select the Style Element you want to use before starting to play. Select any
of the Variations before starting to record. Select one of the Intros to start
with an introduction.
2 Start recording.
▪ Press the START/STOP button to start recording with the automatic accom-
paniment.
▪ Press the PLAYER 1 > PLAY/STOP (
) button to start recording without
the automatic accompaniment. You will later be able to start the accompani-
ment by pressing the START/STOP button.
A 1-measure precount will play before the recording actually begins. When
it begins, record freely.
3 Play as if you were performing live with the Styles.
During recording, select any Style Element (Intro, Variation, Fill, Break,
Ending…) you like. While recording in Backing Sequence Record mode, you
cannot use the Synchro, Tap Tempo, Manual Bass, Balance controls.
If you want to stop the accompaniment, press the START/STOP or one of the
ENDING buttons; restart by pressing the START/STOP button again.
4 When finished recording your Song, press the PLAYER 1 > PLAY/STOP
(
) button to exit recording, and return to the main page of the Sequencer
mode.
If you are recording the accompaniment, and you want to stop it, press the
START/STOP or one of the ENDING buttons; restart by pressing the START/
STOP button again. When finished recording, press the PLAY/STOP (
)
button to exit recording, and return to the main page of the Sequencer mode.
5 While in the main page of the Sequencer mode, press the PLAYER 1 > PLAY/
STOP (
) button to listen to the recorded Song.
To Next Page
Loading...
Need help?
General
