Korg PA1000 Quick Guide

Quick Recording a Backing Sequence Song |127
18 Recording MP3 Songs
Recording an MP3 Song
Prepare for recording
▪ Either choose a Style or Song, if you want to record them in the new Song.
You can choose either MIDI or MP3 Songs.
▪ Choose a Keyboard Set to assign Sounds to the keyboard.
▪ Choose a Voice/Guitar Preset to add effects to your voice/guitar.
Enter MP3 Record mode
▪ While in Style Play or Song Play mode, keep the RECORD button pressed for
about one second to let the MP3 Record dialog appear.
Set the recording parameters
▪ Use the Quality pop-up menu to choose the preferred MP3 audio quality.
The higher the sound quality, the larger the MP3 file that will be generated.
Please note that MP3 files recorded with lower sampling rates might not
sound very good. With MP3 files there is always a trade-off between higher
quality and smaller file size.
▪ Use the Device pop-up menu to choose a location where to temporary store
the recorded MP3 file.
This is not the final destination of your file, since you will be able to choose
a different location after recording. However, be sure there is enough space
for the temporary file, by checking the Free space parameter. The current
file size is always shown by the File length parameter.

Korg PA1000 Specifications

General

Sound Engine	EDS-X (Enhanced Definition Synthesis-eXpanded)
Polyphony	128 voices
Keyboard	61 keys with velocity and aftertouch
Display	7-inch TFT display
Song Player	MP3, SMF (Standard MIDI File), KAR
Storage	960 MB
Connectivity	USB, MIDI, Audio In/Out
Weight	10.75 kg (23.7 lbs)
Effects	148 effect types
Sounds	Over 1, 750 Factory Sounds, 107 Drum Kits
User PCM Sample Memory	600 MB
Style Tracks	8 tracks
Chord Sequencer	Yes
Pads	4 Assignable Pads
Lyrics	MID, KAR, MP3+Lyrics
Sequencer	16 tracks
SongBook	Fully programmable music database
Multi Pad	4 Assignable Pads
Connections	Audio In, Line Out
Clock	Internal
Power Supply	AC adapter