84| Playing the Songs
Mixing two Songs
Assign a Song to each of the Players
▪ Either use the SELECT buttons in the PLAYER 1 or PLAYER 2 sections, or
touch the name of the Song in the display.
The full procedure is described above.
Start both Players at the same time
▪ Keep the SHIFT button pressed, and press any of the two PLAY/STOP (
)
buttons to start both Players at the same time.
Mix the two Players
▪ During playback, move the X-FADER slider to mix the two Songs.
▪ Move the X-FADER slider fully to the left to only listen to Player 1, fully to
the right to only listen to Player 2. Move it to the center to balance the two
Players.
Separately control each Player
▪ During playback, control each Player by using the dedicated PLAYER con-
trols on the control panel.
Stop the Players
▪
Press the relevant PLAY/STOP ( ) button to stop the corresponding Player.
Fade between songs
Instead of starting both Songs together, you can start them one after the
other, and fade between them.
1 Assign a first Song to Player 1, a second Song to Player 2.
2 Move the X-FADER slider fully to the left, to only listen to Player 1.
3 Start Player 1.
4 When the Song is nearing the end, start Player 2.
5 Gently move the X-FADER slider toward the right, to fade out the first Song
and fade in the second Song.
6 While Player 2 is playing, assign a third Song to Player 1, and repeat the
above procedure (by reversing the X-FADER direction) to fade out Player 2
and fade in Player 1.