74 | The Chord Sequencer
10 The Chord Sequencer
Recording Chord Sequences
You can record a Chord Sequence, that will play the chords for you. This
will be useful, for example, when you have to play a repeated sequence, and
prefer to use your left hand to play a solo on the keyboard, or to select the
DNC controllers.
You can start recording while the Arranger is playing.
1 Press the START/STOP button to start the automatic accompaniment.
2 Keep the CHORD SEQUENCER button pressed for about one second to en-
ter record-pending. Its indicator will become steady red.
3 Press the CHORD SEQUENCER button again to start recording. At the be-
ginning of the next measure, the CHORD SEQUENCER indicator will start
flashing in red. Start recording your Chord Sequence.
4 When the Chord Sequence is done, press the CHORD SEQUENCER button
again to stop recording. Its indicator will turn steady green, to show there is
a sequence in memory.
The Chord Sequence will remain in memory until you record a new Chord
Sequence, choose a different Style or SongBook Entry, or you turn the in-
strument off. If the sequence is locked, it will not change when choosing a
different Style or SongBook Entry.
To Next Page
Loading...
