126| Recording MIDI Songs
This window is very similar to the Media > Save page. Files are filtered, so
that can only see MIDI Song files (.mid, .kar).
2 Use the Device pop-up menu to select a storage device, then choose a folder
where to save your Song.
Use the Open and Close buttons to browse through the folders.
Use the scrollbar to see all Songs in the list. Keep the SHIFT button pressed
and touch the Up/Down arrows to scroll to the next/previous alphabetic sec-
tion. As an alternative, use the VALUE control to scroll the list.
3 Choose an existing file, or create a new file.
▪ To overwrite an existing Song, select it. In any case, you can change the
name of the Song while saving, and the original file will not be overwritten.
If you select a .kar file, a file with the same name, but the .mid extension, will
be created. The older file will not be overwritten.
▪ If no Song is selected, a new Song file will be created on the target device. To
deselect a selected Song, touch anywhere else in the Song list, or select the
same storage device again.
At this point, press the EXIT button if you prefer to exit without saving the
Song.
4 Touch the Save button to save the Song into the current folder. The Save
Song dialog box will appear.
5 You may change the name of the Song. Touch the Text Edit ( ) icon to
open the virtual keyboard and edit the name. When done editing the name,
confirm by touching the OK button under the virtual keyboard.
If you started from an existing file, changing the name will create a new file
and will not overwrite the existing file.
6 When back to the Save Song dialog, touch the OK button to save the Song.
To Next Page
Loading...
Need help?
General
