156| Installing the options
Installing a microSD card
To expand the available onboard storage memory, you can install an (optional)
microSD card. The card can be installed by the user. Do not use parts dif-
ferent than the one suggested by KORG, or you risk to damage the instru-
ment!
Please consider a card containing localized musical resources could have
already been installed by your KORG Distributor. If you are not sure, contact
them before removing the installed card.
Precautions
▪ Installation of the microSD card is done at the user’s own risk. KORG will as-
sume no responsibility for any data loss, damage or injury resulting from its
improper installation or use.
▪ Be sure to disconnect the instrument from the AC plug, before opening it.
Warning: Removing or inserting the microSD card while the instrument is
connected to the AC plug may damage the instrument and the card!
▪ To prevent your body’s static electricity from damaging the board’s compo-
nents, touch an unpainted metallic component before proceeding with the
installation.
Installation
For installation, you will need a cross-point screwdriver (not supplied).
1 Disconnect the instrument from the AC plug.
To Next Page
Loading...
