Choosing the Keyboard Sets |41
Display Hold
You may prefer to leave a Select window open after you have chosen a
Sound, Keyboard Set or Style, to continue trying other elements in that
window. Or, you may prefer it automatically closes after you have com-
pleted your choice. This is determined by the Display Hold parameter.
Turn the Display Hold parameter on or off
1 Go to the Global > General Controls > Interface page.
2 Turn the Display Hold parameter on or off:
▪ Select the Display Hold On checkbox to turn it on. Sound, Keyboard
Set, Style, Pad or Voice/Guitar Preset Select windows will remain open
on the display, until you press the EXIT button.
▪ Deselect the Display Hold On checkbox to turn it off. Sound, Keyboard
Set, Style, Pad or Voice/Guitar Preset Select windows will automati-
cally close after you choose an element.
3 Press the EXIT button to return to the previous page.
Factory, User, Direct
Across the pages, you will find words like Factory, User, Direct. These
terms refer to the type of protection from writing, or how much you can
customize them.
▪ Factory (Keyboard Sets, Sounds, Styles, Pads, Voice and Guitar
Presets) are elements that you cannot normally overwrite or modi-
fy. They are meant to warrant that musical resources (like SongBook
Entries) will always find linked musical resources (like Styles).
▪ User (Keyboard Sets, Sounds, Styles, Pads, Voice and Guitar Presets)
are elements that you can write, modify or overwrite. User Style banks
(the side tabs) can be freely renamed to create your own categories.
▪ Direct (Keyboard Sets, Styles, Pads, SongBook Entries, Voice and
Guitar Presets) are User elements that you can directly access from
a storage device.
To Next Page
Loading...
Need help?
General
