64| Playing the Styles
Make the accompaniment start and stop automatically (Synchro Start and
Stop)
1 Be sure the SYNCHRO > START indicator is turned on.
2 Press the SYNCHRO > STOP button, to light up both the START and STOP
indicators.
3 Play a chord to start the accompaniment, and keep the keys pressed.
4 Lift your hands from the keyboard, and see how the accompaniment will
automatically stop.
Make the accompaniment stop automatically (Synchro Stop)
1 Press the SYNCHRO > START button again to turn it off, and leave only the
SYNCHRO > STOP indicator lightened.
2 Press the START/STOP button to start the accompaniment, then play a
chord and keep the keys pressed.
3 Lift your hands from the keyboard, and see how the accompaniment will
automatically stop.
Deactivate the Synchro Start/Stop functions
▪ Press the SYNCHRO > START and/or SYNCHRO > STOP buttons to turn both
indicators off.
Choosing an Intro
An Intro is the introduction of the song. To choose the right Intro for your
song, please note that Intro 1 plays a short sequence with a prerecorded
chord sequence and melody, while Intro 2 plays on the chord recognized on
the keyboard. Intro 3 is usually a one-bar Count In.
Style Element Suggested use
Intro 1 Intro with prerecorded chord sequence and melody.
Intro 2 Intro with chord recognized on the keyboard.
Intro 3/Count In One-measure Count In.
1 Press one of the VARIATION buttons on the control panel to choose the
Variation you want to use for the first verse. The button’s indicator will be
on, meaning the Variation is waiting to start.
2 Press one of the INTRO buttons on the control panel to ‘book’ one of the
Intro sections. The button’s indicator will be on, meaning the Intro is waiting
To Next Page
Loading...
Need help?
General
