96
Recording a new Song (Standard MIDI File)
Second-take recording (Overdubbing)
Second-take recording (Overdubbing)
You may want to record an additional “grouped” track, or replace a previously recorded track. A good
idea may be to record all chords and Style Element changes during the first take, then record Key-
board tracks and Pads during the second take.
1 Press the RECORD button to enter Record mode again. When the Song Record Mode
Select dialog box appears, select Backing Sequence (Quick Record) again.
2 If you are recording just one of the “grouped” tracks, set to Play the track to be pre-
served.
For example, if you only want to record the Keyboard tracks again, set the Kbd/Pad track to Rec,
and the Ch/Acc track to Play.
3 Press the START/STOP button to start recording the selected track.
With the above example, chords will play as recorded; you can record what you play on the key-
board (and the Pads).
4 Repeat the recording procedure, and press the (PLAY/STOP) button in the PLAYER
1 section to stop recording and return to the main page of the Sequencer mode.
5 While in the main page of the Sequencer mode, press the (PLAY/STOP) button in
the PLAYER 1 section to listen to the recorded Song.
Again, the Backing Sequence Song has been converted to an ordinary Song.
Saving a Song
After having recorded a Song that you like, it is a good idea to save it, to avoid losing it when the
instrument is turned off (or put on standby).
1 While in the main page of the Sequencer mode, touch the page menu icon to open the
page menu.
Pa3XLe User Manual v100 (English).book Page 96 Thursday, May 29, 2014 5:42 PM
To Next Page
Loading...
