50
Selecting and saving the “My Setting” Performance
Selecting the startup parameters (the “My Setting” Performance)
There is a special Performance, where you can save your preferred settings for things like Keyboard
Sounds, Effects, Transposition, Assignable Switches, a preferred Style. This Performance is automati-
cally selected when the instrument is turned on (exit from standby). It is called the “My Setting”
Performance.
Selecting the startup parameters (the “My Setting” Performance)
After having done some changes to the Sounds, transposition, or other parameters, you can return to
the startup situation by pressing the MY SETTING button in the control panel.
• Press the MY SETTING button to recall the “startup” settings.
Saving the startup parameters into the “My Setting” Performance
You can save the startup settings (Sounds and other settings, including most of the settings on the
control panel and the selected Style) into this special Performance.
• Keep the MY SETTING button pressed for about one second, until the “Write Startup
Settings” dialog box appears, then touch the OK button to confirm saving to memory.
Selecting and saving the “My Setting” Performance
Pa3XLe User Manual v100 (English).book Page 50 Thursday, May 29, 2014 5:42 PM
To Next Page
Loading...
