30
Turning the instrument on
Turning the instrument on and viewing the main screen
First of all, turn the instrument on and familiarize with the main screen. You can also listen to the
demos.
Turning the instrument on and viewing the main screen
1 Turn Pa900 on (exit from standby) by pressing the STANDBY button located in the con-
trol panel.
After you turn the instrument on, a welcome screen is shown for some seconds, then the main
display appears.
2 When you want to put Pa900 to standby, keep the STANDBY button pressed for about
one second, and release it when the screen appears dimmed.
After having pressed the STANDBY button, the display brightness will be dimmed. At this point,
the shutdown procedure will begin and last for a few seconds. Please do not disconnect the
power cable during this procedure.
Turning the instrument on
Standby (On/Off ) buttonDisplay
To Next Page
Loading...
