81
Singing with a microphone
Connecting a microphone
Quick Guide
Pa900 features a high-quality microphone input for a dynamic microphone. It also features a powerful
digital voice processor, based on technologies developed by TC Helicon, including dedicated effects
and three-part harmonization.
Connecting a microphone
To sing along with the Pa900, you must first connect a dynamic microphone to the LEFT audio input
(the one that goes into the Voice Processor).
1 Press the GLOBAL button, touch the “Audio & Video” button in the display, then touch
the Audio In tab to reach the “Audio In” page.
Be sure the “Input Routing” is set to “Left In to Voice Processor”.
2 Press the EXIT button to return to the main screen.
3 Turn the Microphone input off by using the dedicated MIC on/off switch on the control
panel, and lower the MIC VOLUME knob all way down.
Note: Keeping the micro-
phone level low helps avoid-
ing feedback. Feedback is
caused by audio generated
by the Pa900, returning to the
audio circuitry via the micro-
phone.
Singing with a microphone
Left Audio (Microphone) input Microphone controls
i
To Next Page
Loading...
