Korg SP-280 - Playing the SP-280; Single Sound Mode

11
Playing a single sound (Single mode)
You can select a sound from the thirty sounds supplied with the instrument (10
sounds x 3 banks).
Soundbuon Bank Soundname #
PIANO1 1 Grand Piano 3
2 Classic Piano 2
3 Jazz Piano 2
PIANO2 1 Live Piano 2
2 Honky-Tonk 2
3 Elec.Grand 1
E.PIANO1 1 Stage E.piano 1
2 Bright E.Piano 2
3 Tremolo EP 3
E.PIANO2 1 Dig.E.Piano1 2
2 60's E.Piano 1
3 Dig.E.Piano2 2
HARPSI/CLAV 1 Harpsichord 2
2 Clav 1
3 Synth Clav 2
VIBES/GUITAR 1 Vibraphone 1
2 Marimba 1
3 Acoustic Guitar 2
ORGAN1 1 Jazz Organ1 2
2 Jazz Organ2 2
3 Jazz Organ3 2
ORGAN2 1 Pipe Organ1 2
2 Pipe Organ2 2
3 Positive Organ 3
STRINGS 1 Strings 2
2 Cinema Strings 2
3 Analog Strings 2
CHOIR 1 Aah Choir 1
2 Ooh Voices 2
3 Classical Choir 3
(#) These columns show the number of oscillators per voice that are used by
each sound. (refer to “About maximum polyphony” on page 22.)
1. Pressthesoundbuonforthesoundthatyouwanttoplay.
The LED for that buon will light up.
2. PresstheBANKbuontoselectoneofthethreesounds.
Each press of the BANK buon switches the bank in the order 1, 2, 3, 1, ...,
and the corresponding LED to the right of the BANK buon will light up.
For example, to select the electric grand piano sound, press the PIANO2 but-
ton, aer which its LED lights up.
Then, press the BANK buon twice to select bank 3 (electric grand piano);
the LED below and to the right of the BANK buon will light up.
In addition, the bank selected for a sound buon remains the same, even if a
dierent sound buon is pressed.
2
1
Each time the SP-280 is turned on, the sound in bank 1 is selected for all
sound buons.
Playing the SP-280