Korg TM-50 User Manual

14
4.
If you want to change the time signature,
press the BEAT
p
or
q
buons to make
your selection.
The time signature will change as follows.
Press the BEAT
p
or
q
buons:
n
0
n
1 ...
9 (9 beats)
n
(Duplet)
n
(Triplet)
n
(Triplet without the center beat)
n
(Quadruplet)
n
(Quadruplet
without the center beat)
n
0 ...
5.
Play along with the metronome tempo.
6.
To stop the metronome, press the
START/STOP buon.
Using tap tempo
The tap tempo that you input will be dis-
played as a BPM (Beats Per Minute) value.
1.
Press the METRONOME ON buon.
The pendulum of the metronome will appear
on the display and “
” will
appear above it.
2.
Press the TAP TEMPO buon several
times at regular intervals at the tempo
that you want.
The TM-50 detects the interval used when
pressing the buon and displays it as a
BPM (Beats Per Minute) value, and it will
be set as the tempo.
While the tempo is detected, “
” will
appear on the display.
When the BPM that has been detected by
the tap tempo is less than 30, “Lo” will
appear on the display and the tempo will
be set at “30.”
If the BPM detected by the tap tempo ex-
ceeds 252, “Hi” will appear on the display
and the tempo will be set at “252.”
3.
Press the START/STOP buon to start the
metronome.
The metronome pendulum will swing
from le to right according to the tempo

Korg TM-50 Specifications

General

Brand	Korg
Model	TM-50
Category	Tuner
Language	English