Korg TM-50 - Overall Specifications

17
Backlight
When necessary, press the Backlight buon
“
” to set the backlight.
Each time the Backlight buon is pressed, you
can switch to So  Auto  O  So…
Soft: Low-intensity lighting to prevent bat-
tery consumption.
Auto: When a tone is input and the buon is
pressed, the backlight fully lights up.
If a sound is not input or a buon is not
pressed for 10 seconds, the backlight will
automatically change to the so seing
brightness.
Off: The backlight does not light up.
Specifications
Tuner section
Scale: 12 note equal temperament
Detection range*: C1 (32.70 Hz)–C8 (4186.01
Hz) for a sinewave
Reference tone: C3 (130.81 Hz)–C6 (1046.50
Hz) 3 octave
Tuning modes: Meter mode (AUTO),
Sound Out mode (MAN-
UAL), Sound Back mode
(AUTO)
Calibration range:
A4 = 410 Hz–480 Hz (1 Hz step)
Detection accuracy: Beer than ±1 cent
Sound accuracy: Beer than ±1 cent
Metronome section
Tempo range: 30–252 beats per minute
(bpm)
Tempo seing: PENDULUM STEP, FULL
STEP, TAP TEMPO