16
3 Value dial
Use this to adjust master level,
edit effects, and select pro-
grams.
4 OUTPUT jack
Connect this jack to your bass
amp or headphones etc.
5 AUX jack (stereo)
Connect this jack to a CD play-
er or other audio source.
6 INPUT jack
Connect this jack to your bass.
7 +/– buttons
Use these buttons to select
programs, edit effects, and
adjust the master level.
8 Input level switch
Set this accordingly to the out-
put level of your bass.
9 EDIT √ [ ]/® [HOLD] buttons
Use these buttons to select the
parameter that you wish to
edit, and to operate the Phrase
Trainer function.
0 RHYTHM/AUX EFFECT button
This button enters Rhythm
Trainer mode or AUX Effect
mode.
A PHRASE TRAINER [ ] button
This button enters Phrase
Trainer mode. This is also
used to begin recording on the
Phrase Trainer.
B BYPASS
·
TUNE [ ] button
Use this button when you wish
to tune in Play mode. (The
PANDORA PX3B will be by-
passed or muted.) This is also
used to turn the effects on/off
and to playback/pause the
Phrase Trainer.
Controls and connectors
1
2
3
4
5
6
7
8
9
0
A
B
C
D
1 Power switch/Backlight switch
This switch turns the power
on/off, and also turns the back-
light on/off.
When batteries are used,
leaving the backlight ON for
an extended period will short-
en battery life.
2 DC9V
The separately sold AC adapt-
er (DC9V ) can be con-
nected here.
To Next Page
Loading...
