34
3. Reloading the factory programs
While holding down the HBB button and the + but-
ton, turn on the power. The LCD will ask “PLOAD?”
If you decide not to reload the factory programs,
press the EXIT button.
The factory programs will
not be reloaded; the normal power-on screen will
appear, and the PANDORA PX3B will be in Pro-
gram mode.
If you press the BYPASS
·
TUNE button, the facto-
ry-set programs will be re-loaded into the user pro-
gram area. The display will indicate “LOAD”, “VERI”,
“COMPL” for a short time, and then the power-on
screen will appear.
Be aware that if you reload the factory pro-
grams, all user programs will be rewritten.
To Next Page
Loading...
