18
Making connections
For all equipment being connected, turn the power
OFF and lower the volume.
mini-component/stereo etc.
*1
bass amp/
powered monitor
*1
*2
CD player etc.*3
*1
bass
AC adapter *4
headphone *5
*1 Connecting cables are sold separately.
*2 PANDORA’s output jack is stereo. If you use a
standard mono cable to connect it to a bass amp
etc., only the L (left) output will be heard.
*3 If a CD player or other audio source is connect-
ed to AUX jack, you can play along on your bass
with a tape, etc. However the volume must be
adjusted on the connected device.
*4 Be sure to use only the specified AC adapter
(DC9V 300-500mA).
*5 PANDORA’s output level and sound quality will
vary depending on which headphones are used.
We recommend using good quality low imped-
ance headphones, 32 Ohms or less with a sen-
sitivity rating near 100dB/mW or above. Many
headphones sold for use with portable CD or
cassette players will work just fine.
To Next Page
Loading...
