24
Equalizer mode
In this mode, the EQ display will indicate the gain of
each equalizer band as you adjust it, for easy edit-
ing.
Hold down the EXIT button and press the HBB but-
ton.
The LCD will indicate "EQ L," and the EQ icon will
light to indicate that you are in Equalizer mode.
If you perform this procedure for a program
whose equalizer is OFF, the equalizer will forc-
ibly be turned ON.
Rotate the value dial to adjust the LOW band of the
equalizer. As necessary, press the L (BYPASS/
TUNE [ ], M (PHRASE TRAINER [ ]),
H (EDIT√ [ ]), Pr (RHYTHM/AUX EFFECT),
Tr (EDIT®[HOLD]) buttons to display the values in
the LCD, and rotate the value dial to adjust the
gain.
To return to Play mode, press the EXIT button.
• L button: select "EQ L" for low frequency range
• M button:
select "EQ M" for mid frequency range
• H button:
select "EQ H" for high frequency range
• Pr button: select "EQ PR" for presence
(ultra-high) frequency range
• Tr button: select "EQ TR" for trim settings
• Value dial: adjust the gain
If you wish to save the edited values, perform
the "9) WRITE" operation. If you turn off the
power or select another program without per-
forming "9) WRITE," the program will return to
its original settings.
To Next Page
Loading...
