29
3. Playback
The recording phrase will playback as a loop.
During playback or while paused, you can use the
+/– buttons to select programs.
playback speed (%)
Rotating the Value dial toward the left will slow down
the playback speed without affecting the pitch.
The playback speed can be adjusted in 5% steps
over a range of 100%, 95%, 90%…25%.
During playback, you can press the [HOLD] button
to hold the sound at that moment (Hold function).
• [ ] button: Pause/playback
• [ ] button: Re-record
• [ ] button: Rewind
• [HOLD] button:
Switch the Hold function on/off
• Value dial: Set the playback speed
If you press the EXIT button or the RHYTHM/
AUX EFFECT button, the recorded phrase will
be erased.
4. Pause
When you press the [ ] button, the playback will
pause. Press the [ ] button once again, and play-
back will resume.
Pressing the [ ] button while playback is paused
will return you to the beginning of the recorded
phrase.
• [ ] button: Pause/playback
• [ ] button: Re-record
• [ ]
button: To return to the beginning of the phrase
• Value dial: Set the playback speed
If you wish to re-record
To re-record the phrase, press the [ ] button to
pause the playback. While paused, the sound from
the device connected to the AUX and INPUT jack
will be output. Now set your input source to the be-
ginning of the desired phrase.
Start the CD or other audio source, and press the
[ ] button at the beginning of the desired phrase.
To Next Page
Loading...
