MEDIA
1.1
145
7) Load a Combination: selected icon
The combination you select will be loaded into the loading
destination combination number you specify.
1 If desired, use “From” to re-select the combination to be
loaded.
2 In “To,” select the bank and combination into which the
data will be loaded.
3 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
8) Load Drum Kits: selected icon
All drum kits in the .PCG file will be loaded.
1 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
9) Load Drum Kit [00…15(INT),16…23(User):
selected icon
All drum kit data of the selected drum kit block will be
loaded into the drum kit block you specify as the loading
destination.
1 In “To,” select the drum kit block into which the data will
be loaded.
2 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
10) Load a Drum Kit: selected icon
The selected drum kit will be loaded into the drum kit num-
ber you specify as the loading destination.
1 If desired, use “From” to re-select the drum kit to be
loaded.
2 In “To,” select the loading destination drum kit.
3 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
11) Load Arpeggio Patterns: selected icon
All user arpeggio pattern data in the .PCG file will be
loaded.
1 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
12) Load Arpeggio Pattern
[000…199(INT), 200…215(User)]: selected icon
All user arpeggio pattern data in the selected user arpeggio
pattern block will be loaded into the user arpeggio pattern
block you specify as the loading destination.
1 In “To,” select the loading destination user arpeggio pat-
tern block.
If you select user arpeggio pattern block 000–199 (INT)
as the destination for loading either 200–215(User), user
arpeggio patterns 000–015 will be loaded. If you select
200–215(User) as the loading destination for 000–199
(INT), the data will be loaded into user arpeggio pat-
terns 000–015(INT).
2 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
13) Load an Arpeggio Pattern: selected icon
The selected user arpeggio pattern data will be loaded into
the user arpeggio pattern number that you specify as the
loading destination.
1 If desired, use “From” to re-select the user arpeggio pat-
tern to be loaded.
2 In “To,” specify the loading destination user arpeggio
pattern.
3 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
14) Load Global Setting: selected icon
Global setting data in the .PCG file will be loaded.
This includes Global mode parameters other than drum
kits and user arpeggio patterns.
Memory protect, and LCD screen contrast will not be
loaded.
1 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
15) Load .SNG: selected icon
All data in the .SNG file will be loaded.
1 Use “Select .SNG Allocation” to specify how the song
data from the .SNG file will be loaded.
Append: The song will be loaded after the last song data
that already exists in internal memory. At this time, the
To Next Page
Loading...
