Korg TR - 4: Media Information

MEDIA
1.1
157
1.1–4a: Media (Media select)
This displays information on the media that is selected by
“Media Select.”
☞ 1.1–1c: Media select
Vol. Label (Volume Label):
The volume label of the media.
SCSI ID:
The specified SCSI ID. If the TR’s internal SD card slot is
selected, “–” will be displayed.
Dev. Type (Device Type):
The type of media.
Product ID:
The vendor ID, product, and product version, etc.
Format (Format Type):
The type of format. If not formatted, this will indicate
“Unformatted.”
Total Size:
The capacity of the media (in bytes).
Free Size:
The free capacity of the media (in bytes).
Write Protect:
The write protect status of the media. This will indicate
“On” if protected, or “Off” if not protected.
Removable (Supports Removable):
This will indicate “Yes” if the media of the selected device
can be removed (e.g., SD card, MO disc, removable hard
disk). If the media is fixed, this will be “No.”
■ 1.1–4b: UTILITY
Scan SCSI device
This command allows you to re-mount a connected SCSI
device if the EXB-SMPL option is installed.
1 From the Utility menu, select “Scan SCSI device.”
The currently-connected SCSI devices will be re-scanned
(if the EXB-SMPL option is installed). Once scanning is
completed, any valid SCSI device can be selected in
“Media Select.”
Never connect or disconnect a SCSI cable while the
power of the TR or of a SCSI device is turned on. Doing
so can cause irreparable malfunctions.
1.1–4: Media Information
1.1–4a
1.1–4b